Commercial Reverse Osmosis System 500 gpd
Product Description
If you're looking for a commercial grade reverse osmosis system that can produce 500 gallons per day and eliminate impurities, this is the one. The system uses two 2.5" x 21" TFC HF1 Reverse Osmosis Membranes and a 5 micron Sediment and 10 micron Carbon block pre-filter to remove chlorine, taste and odor. It also comes standard with an RO System Only configuration, so it's ready to be used as a Whole House system or for drinking water purposes.
In addition to the standard RO System, you can also add the Storage Tank Kit to give you a much larger range of applications. With this kit installed, you'll be able to store and draw filtered water from the tank, eliminating regular Whole House RO system drawbacks such as low pressure and low flow.
Commercial Reverse Osmosis System 500 gpd Specifications
- Membranes: Two 2.5" x 21" TFC HF1 Reverse Osmosis Membranes 330 GPD each
- Membrane Housing: Two 2.5" x 21" Champ membrane housings, Features a patented design and requires no tools for servicing.
- Pump: One 401 Fluid-O-Tech 2.3 GPM brass rotary vane pump, Directly couples to the motor, and designed for continuous high pressures.
- Motor: One 1/3 HP GE motor, 110 or 220 Volts AC, 60 or 50 hertz.
- Frame: Aluminum, White Powder Coated, Corrosion resistant, and light weight.
- Sediment Filter: One 4.5" x 10" Big White 5 micron sediment filter, Removes sediments and protects the system.
- Carbon Block: One 4.5" x 10" Big White 10 micron carbon block, Removes chlorine, odor, and taste from incoming feed water.
- Filter Housing: Two 4.5" x 10" Big Grey double O-ring filter housings, Offers durability and improved sealing capabilities.
- Pressure Gauges: One 2.5" Gauge, 0-300 PSI, Panel Mounted Glycerin filled, and Two 1.5" Gauge, 0-160 PSI, top mount dry gauges, For monitoring the system's operating pressure, the filter and carbon operating pressure.
- Low Pressure Switch: One McCann's Low Pressure Switch, Safety device to protect the pump from running dry when there is insufficient feed water pressure.
- Float Switch: One mechanical float switch, For atmospheric storage tank applications.
- Solenoid Valve: One Solenoid Valve with manual override, 110 or 220 Volts AC, 60 or 50 hertz, Assists with the on/off functionality of the system.
- Manual Flush Valve: One 1/4" brass needle valve, Regulates the product to waste ratio (systems recovery).
- Switch: One manual on/off Switch.
- Weight: 140 lbs
- Dimensions: 14" x 20" x 27"
- Easy Maintenance & Operation: feature a compact design and have all of their components strategically located for easy access and inspection.
With Options" Features
- Concentrate Re-Cycle Valve: This feature offers a higher recovery rate for the system by taking a percentage of the waste water and feeding it back into the system.
- TDS Meter: One panel mount TDS meter, provides you with accurate readings of the feed and product water quality.
- High Pressure Switch: One Square D high pressure switch, Automatically starts when the tank pressure falls below 40 psi, and stops when the pressure reaches 60 psi.
- Flow Meter: One Product (0-2 GPM) & one waste (0-5 GPM) flow meters, enables operator to accurately adjust product to waste ratio and monitor systems performance.
The Best Products
There are no customer reviews yet. Be the first to Write a Review!
