IMPORTANT: Water heater electric must be mounted vertically and connectors tightened; Displays degrees Celsius only; Requires 13AWG wire and ?32AMP circuit breaker, water connection 1/2" NPT
Tankless Water Heater Specifi: 3500W at 110V, household line ?1.5 square dedicated line, required circuit breaker ?32AMP, circuit breaker requirement 16A
Applicable Occasions: Tankless water heater electric are suitable for limited spaces such as kitchens, washbasins, and RVs. Not suitable for showers (showers usually require at least 1.8 gpm)
Temperature Control: Portable water heater requires 0.15-0.4Mpa water pressure to start. Large water flow means low temperature, small water flow means high temperature; if the water flow is not turned on, tankless water heater cannot start
High-quality Materials: 304 stainless steel lining, 316L stainless steel heating tube, sturdy ABS shell, corrosion-resistant brass interface.
Installation Notes: Turn on the water first and then the power; the power switch should be installed under the sink and should not touch the cabinet; the room temperature should be above 0°C, and the hot water outlet should not be too far from the hot water use point
There are no customer reviews yet. Be the first to Write a Review!