VEVOR 120W Water Pressure Booster Pump, 110V AC,396 GPH 21.75 PSI Household Home Automatic Pressure Booster Pump, Max Flow 25 L/min Shower Booster Pump with Water Flow Switch, for Whole House Shower

Boost Your Home Water Pressure: The household booster pump operates at low noise, with a maximum pressure of 21.75 PSI (1.5 Bar), a maximum flow rate of 396 GPH, and a maximum head of 49.2 FT. The water booster pump for house is equipped with 2 DN20 to DN15 loose copper connectors, DN20 to DN15 water flow switch, and water pipe sealing tape. All you need is a wrench to complete the installation. High-Quality Material: The water pressure booster pump is made of a cast copper pump head for strong wear resistance. The built-in brass impeller has a longer service life. The body's surface adopts an electrostatic spraying process, which is smooth, stain-resistant, and corrosion-resistant. Convenient Design: The house water pressure booster pump automatically senses the water flow and precisely controls the start/stop. It automatically starts when you use water and stands by automatically when the water is turned off. The pressure booster features double security protection: leakage and overload protection. It automatically cuts off the power when the electricity leaks and stops when it exceeds a certain temperature or the motor load is too high to avoid electric shock. Matters Needing Attention: 1.Power outlets must be grounded to prevent accidental electric shock. 2.Choose an installation location where water is less likely to splash to prevent moisture damage. 3.The pump allows for horizontal and vertical installation methods. Do not install with the motor inverted or tilted downwards. 4. When installing, be sure to avoid materials with magnetism. Especially during threading, iron filings must be removed and should not enter the control cavity or pump body. Matters Needing Attention: 4. The direction of the water flow in the connecting pipeline must match the flow direction. 5. For ease of use, maintenance, and replacement, please install control valves on both the inlet and outlet pipelines. 6. Suitable only for localized boosting, with a maximum coverage area of about 100?. 7. If not used for a prolonged period, please run the pump before the next use to prevent lime scale from clogging the impeller.